This 15dBi antenna is the best antenna we tested for point to point applications over long distances. In our tests, it provided a much stronger signal than other Yagis claiming the same gain, and at half the size. This compact antenna has a narrow beam width (16 degrees horizontal/21 degrees vertical) that directs the WiFi signal and helps to prevent interference from your neighbors equipment. With their permission you could even log onto theirs. It's called sharing.
The antenna is made of precision cast aluminum alloy and is protected with a durable, powder coat finish, and the design presents very little wind resistance. We are currently using two Point To Point Wi-Fi Antennas for a connection over three miles away. This antenna works best with a clear line of sight. Includes: aluminum/stainless steel pole mount with "U" bolts. Size: 11.8" x 15.75". N Female connector. The cables and adapter accessories are not included.
Note: This antenna is an accessory and will not work by itself.
Accessories you may need if you purchase the antenna: | ||||||
---|---|---|---|---|---|---|
Long Range WiFi Bridge System |
Versa WiFi USB Adapter 3 |
10-Foot WiFi Cable – N Male To RP-SMA Male | 20 ft Ultra Low Loss Coax Cable |
RP-SMA Adapter |
RP-TNC Adapter | |
Connecting to a Computer – Option #1 |
![]() |
![]() |
||||
Connecting to a Computer – Option #2 |
![]() |
![]() |
![]() |
|||
Connecting to a Router – Option #1 (Router must have a removable antenna with RP-SMA connector) |
![]() |
|||||
Connecting to a Router – Option #2 (Router must have a removable antenna with RP-SMA connector) |
![]() |
![]() |
||||
Connecting to a Router – Option #3 (Router must have a removable antenna with RP-TNC connector) |
![]() |
![]() |
||||
WiFi Sharing | ![]() |
|||||
Note: Specifications are subject to change without notice.
|
What's in the Box | |
---|---|
|
|
General Specifications | |
---|---|
Frequency Range: | 2400-2483 MHz |
Antenna Gain: | 15dBi |
Polarization Type: | Horizontal or Vertical |
VSWR: | <1.5 |
Horizontal Beamwidth: | 16° |
Vertical Beamwidth: | 21° |
Front to Back Ratio: | >20dB |
Connector Type: | N-Female |
Input Impedance: | 50Ω |
Directional: | Yes |
Construction Materials: | Aluminum and Steel |
Operating Temperature: | -40°F to 149°F |
Mount Type: | Mounts to a Pole (not included) |
Diameter of Pole Needed: | 1.25" ~ 2" |
Rated Wind Velocity: | 85 MPH |
Antenna Dimensions: | 15.75" W x 11.8" H |
Antenna Weight: | 3.3 lbs |
Warranty: | 1-Year Limited |
Note: Specifications are subject to change without notice.
|