Comes Configured and Wired - Easy Setup, High Value
The Long Range WiFi Bridge System is the best way to connect two locations to the same network wirelessly up to 3 miles away. This system is very simple to set up. It comes preconfigured and wired by C. Crane so there are no settings to adjust or software to install. Just attach the antennas (sold separately) to each half of the bridge, at each location, and plug them in. Use larger antennas like the Point-To-Point WiFi Antenna for long distances, or smaller antennas for shorter distances. Good line of sight without obstructions must be achieved between both antennas for best reception. LED lights on each bridging device make it easy to align your antennas with each other.
|Will it work for me?|
You will need to connect the first half of the WiFi Bridge, using the supplied 60" (5 foot) Ethernet cable, to an empty LAN port on your router. The Wireless Bridge then beams the encrypted Internet signal to your second location wirelessly. The second half of the system terminates with an Ethernet cable that provides Internet and network connectivity to one computer or other device such as a WiFi router. You will need power at both locations to power the Bridge.
The signal between the two points of the WiFi Bridge System are heavily encrypted for security. The cost of the WiFi Bridge System is a fraction of the more expensive proprietary systems. It provides up to 24Mbps of throughput which is faster than most Internet Service Provider download speeds. File transfer between two computers is limited to this same speed also.
Please Note: C. Crane recommends the following antennas with the Long Range WiFi Bridge System: Point to Point WiFi Antenna, 14dBi Indoor/Outdoor 2.4 GHz WiFi Antenna and High-Gain 8dBi 2.4GHz Outdoor WiFi Antenna. It is possible to use another company's antennas that use the N-female type connection however we do not recommend antennas with a higher gain than what we offer due to FCC restrictions.
This kit is designed to be plugged into a router that is configured using Dynamic Host Configuration Protocol (DHCP) which is the standard factory configuration of most routers. An Internet Connection is also required.
January, 4 2017
Well made durable system. Good value. Does the job much better than our old system.
An easy to set up reliable system
November, 3 2016
Our family has multiple homes covering almost 200 acres. The homes near the road can get internet, provided by the local cable company. But the houses further off the road are beyond what the local company will run. We had the cable company run the connection to homes up front and used the WiFi Bridge to system to provide internet connections to homes further back on the property. The speed is fantastic, and we have had no issues due to weather. The children in one of the homes are home schooled and use the internet daily for their school work and to watch online videos.
Easy to install,Reasonable price,Dependable
None that I can find
May, 11 2016
Our ISP solutions were limited to ADSL 512k or 4G LTE, neither would fit the bill. The cable provider was at the corner of our property but the build would have cost them $40k to get to us, ($20k to get permit to just to say we could cross RR tracks). We found this bridge system on a web search and bought the package with point to point antennaes. after some testing we installed it on a power pole where the cable company was on the property and beamed it 3/4mi to our on site facility. Worked right out of the box, setup instructions were clear and easily understandable. In the end we spent $1.7K for the build out saving ourselves a tremendous amount of capital investment. Thanks C.Crane!
Great range and dependable.
Getting that last mile done efficiently.
January, 19 2015
Have installed several of these. They work great shooting through a small tree line and getting 50mbs :)
July, 17 2012
I have tried internet extenders and power line extenders with variable results. The setup for these products had been a challenge and they were sensitive to power outages and other signals in the vicinity.The WiFi Bridge Kit has provided the first reliable solution to providing internet access from one house to my other house nearby.The setup was straightforward and simple and with the Indoor/Outdoor WiFi Antenna it is a perfect combination.
|Flash/SDRAM:||16 M / 64 M|
|Networking Interface:||1 X 10/100 BASE-TX (Cat. 5-6, RJ-45) Ethernet Interface|
|WiFi Mode:||802.11b/g/n mixed|
|Standard POE Mode:||802.3at/af|
|Transmit Power||Max 800mW, regular 400mW|
|Receive Sensitivity||-90dBm @ 802.11n
-95dBm @ 802.11b/g
|Frequency:||2.4 GHz ISM Band|
|Security:||504 bit WPA2 Encryption|
|Power Supply:||Input: 100~240 50-60Hz 0.55A
Output: DC 48V (0.5A)
|Power Method:||Passive Power over Ethernet (pairs 4,5+; 7,8 return)|
|Operating Temperature:||-4° Fahrenheit to +149° Fahrenheit (-20 to +65 Celsius)|
|Bridge Device Weight:||5.1 ounces|
|Bridge System Weight:||7Lbs (not including antennas)|
|Ethernet Cable #1:||50 FT, Category 6 Enhanced 550MHz, ANSI/TIA/EIA 568B.2, UTP Unshielded Twisted Pair, PVC Jacket, 24 AWG, Gold Plated Connectors|
|Ethernet Cable #2:||5 FT, Category 5 Enhanced 350MHz, TIA/EIA 568B.2, UTP Unshielded Twisted Pair, PVC Jacket, 24 AWG, Gold Plated Connectors|
|Approvals||FCC Part 15.247, IC RS210, IP68|