Radio Noise Solutions
Services for the Blind
Radio Reading Service
Map to Our Store
Our Favorite Links
Damage is causing some unavoidable service delays in portions of the affected area. Please
check FedEx.com and
further detailed information on possible delays.
It's a scanner, an AM/FM radio and an atomic alarm clock!
The Uniden BearCat BC370CRS Radio Scanner is a very sensitive scanner combined with a conventional AM/FM radio – and it can save your life. This convenient tabletop scanner picks up police, fire and Ham, and covers 25 to 950 MHz with 300 memories in ten memory banks. The BearCat covers all the popular scanning bands, including military and civilian aircraft. It features a pre-programmed Service Search that can search and detect active frequencies which may not be published for your area. It can receive both US and Canadian all-hazards alerts. Even when the scanner is turned off, the BearCat scanner can notify you of alerts with an alert tone, voice audio of the alert and can display the alert message summary. The BearCat BC370CRS Scanner is the first radio to pick up and alert you to special digital NOAA emergency transmissions broadcast right off of AM and FM radio.
This space-saving scanner is also a radio that covers AM/FM and includes 30 presets (10 AM, 20 FM). The BearCat BC370CRS Scanner even has an accurate atomic clock and alarm that can be set to any time zone including GMT for the radio professional. This everything radio is an excellent product that is possibly the best emergency radio you can own. Runs on included AC Adapter. Requires three "AA" batteries for limited backup power only (not included). Bob says, in case of a power outage, be sure you have portable back up power source. Telescopic antenna and AM loop antenna included. Improve the reception with our Coaxial Scanner Antenna (with BNC connector).
Weight: 1.4 lbs. Size: 8.1” W x 3.25” H x 7” D.
Yes, but the scanner will not recharge batteries in the compartment. Note: Do not mix alkaline or rechargeable battery types in the scanner.
Yes, you can store up to 4 different county codes in your scanner. You can then select to receive alerts for one or more of them.
To reset the scanner to factory defaults, turn off the scanner. Then while holding down 2, 9 and HOLD, turn on the scanner. This procedure will erase all scanner memory content and restore your scanner to factory defaults.
We currently have two different ways that you can review a product that you purchased from us.
We do look at all reviews/testimonials for content and only refuse those with profanity or inappropriate content. All
others usually get approval for posting (good and bad) within 48 hours. If you have a problem with any of our products please contact us
as we are able to resolve most issues.