Sangean RCR-2 Digital Atomic Clock Radio

1. With the radio turned on, tune to the station you would like to wake to. 
2. Press Alarm 1 or Alarm 2 until you hear a beep - you have now assigned that radio station to either Alarm 1 or Alarm 2.
3. To set the wake time, you now have to turn off the radio
4. With the radio off, push and release Alarm 1 or Alarm 2 (depending on which one you set during step 2)
5. Press and release the "Set" button
6. Press the Up/Down tuning button to set the hour
7. Press and release "Set" button to save hour
8. Press Up/Down button to set minute
9. Press "Set" button to save minute
10. Press Up/Down button to set day(s)
11. Press "Set" button to save day(s)
12. Press Mode/Band button until display shows a speaker and half circle.
13. Press Alarm button 1 or 2 (depending on which one you set during step 2) to save.

In order to use the SoftSpeaker Pillow Speaker with the RCR-2 you will need a "Mono X Stereo" adapter.

No.

Power supply:	110-120 Volt/50-60 Hz
Output Power:	800 mW max
Power consumption:	7W (max.).
Frequency coverage:	FM 87.50 - 108 .0 MHz  AM 520 - 1710 kHz
AM Antenna:	Internal Ferrite Bar
FM Antenna:	42" External Wire
Alarm:	Dual Alarm Systems
Snooze:	5 min
Sleep Timer:	15-120 min
Presets:	14 Station Presets (7 each on FM/AM bands)
Warranty:	1 Year