The GeoBulb-3 is brighter and uses less energy than the GeoBulb-2

What the label tells you

The GeoBulb-3 cool white LED light bulb uses 7 Watts of power to put out about as much light as a 50-Watt incandescent light bulb. You can use it in most places where you currently use an indoor, standard, screw-in 60-Watt bulb. You can install a GeoBulb to bring energy efficient lighting to a foyer, open ceiling cans or track lighting. It is still initially more costly than a compact fluorescent but the cost over the life of the bulb is getting close to the cost of using a compact fluorescent in some cases. A GeoBulb cost about 2 cents a day for 24 hours a day compared to 17 cents a day for incandescent. A few examples of best places to use the GeoBulb are in high ceilings where it is unsafe, costly and time consuming to change a light. The GeoBulb gives off most of its light evenly from the top of the bulb. You get your best return when you replace a bulb that is "on" most of the time.

The GeoBulb gives off very little heat and turns on instantly at full brightness. There is no warm-up period like compact fluorescents. Once you install a GeoBulb, you don't have to think about changing it for up to five years even if used continuously. Unlike CFL's, the GeoBulb puts out a consistent color of light for the life of the bulb. It has no mercury, can be used in colder temperatures, and is built for maximum longevity.

The GeoBulb is available in three color temperatures: Cool White, Warm White and Soft White, and is backed by a five-year limited warranty. The room temperature must not exceed 95°F for the warranty to be valid. In addition, the GeoBulb must be used in an open fixture for ventilation.

Weight: 4.8 oz. Size: 4.7" H x 2.25" Dia.

Note: The GeoBulb-3 is non-dimmable. Using this light bulb with a dimmer switch may damage the bulb. It must be used in a room temperature of less than 95°F and in an open ventilated fixture or it will void the warranty.