- AM FM Radios
- WiFi & Internet
- LED Light
- Emergency Supplies
Prices shown in currencies other than US Dollars are estimates based on current exchange rates. We will charge your credit card in US Dollars on the day your order is shipped, and the conversion to your local currency will be done at the prevailing rate by your credit card issuer.
C. Crane will not mark your parcel as a “gift”, declare a value lower than the actual price paid, or otherwise prepare false customs information.
You may have noticed this new acronym popping up on some of our products. RoHS stands for Restrictions on Hazardous Substances, and it's a directive that could have a huge impact on the production and disposal of consumer electronics. First adopted in Europe in 2006 (and later adopted in California in 2007), RoHS restricts the use of six dangerous substances in lots of common electronics. According to the official RoHS compliance Web site (www.rohs.eu), the RoHS symbol indicates that "new electrical and electronic equipment put on the market does not contain any of the six banned substances: lead, mercury, cadmium, hexavalent chromium, poly-brominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE), in quantities exceeding maximum concentration values."
While some military and medical equipment is exempt from RoHS compliance, the electronics governed by the standard are among the most common you'll find in your home, from radios to MP3 players to cell phones and (increasingly) computers. In practical terms, the standard protects factory workers at the production level, sharply reducing their exposure to hazardous substances. The standard also has a profound impact on the disposal and recycling of electronics, in that disposed substances will no longer have at least six of the most hazardous chemicals formerly found in electronics, and recycled electronics will not expose workers to toxics as they harvest components.
If there is a weak WiFi signal that's too far away for good performance, the New CC Vector can latch on and repeat a stronger signal in your location. The reception exceeds other "WiFi Range Extenders" designed for in-home use and it works on all smartphones, tablets, PCs, MAC and smart TVs. It also connects to any one of our Versa WiFi USB Adapter 3, Super USB WiFi Antenna 3, CC X Mile Omni or CC X Mile Long Range WiFi antennas. The repeater uses the most popular WiFi band at 2.4GHz and requires a compatible C. Crane USB Antenna (sold separately) to work as described.
We also have repeater systems available to match three of the most common WiFi problems; for a large home, for an RV, boat or big rig, or for a remote building. These systems are capable of supporting two users watching standard quality videos from Netflix™ or several users browsing the internet simultaneously. Setup is simple and easy for basic computer users and the systems come with full C. Crane Technical Support.
|Standards||Wired: IEEE 802.3/802.3u
Wireless: 802.11b, 802.11g, 802.11n
|Interface||WAN: 10/100BASE-TX Port * 1
LAN: 10/100BASE-TX Port * 1
USB 2.0 Port * 1
WPA/WPA2-PSK (Pre-Shared Key)
WPA/WPA2 Enterprise mode (802.1x)
WiFi Protected Setup (WPS)
|Compatible USB Wireless Adapters||Super USB WiFi Antenna 3
CC X Mile Omni
CC X Mile Long Range
Versa WiFi USB Adapter 3
RT3070 USB Adapter (Any)
|Mode||Receiver Sensitivity (dBm)|
|802.11n||20MHz: MCS0 : -90, MCS7 : -71
40MHz: MCS0 : -88, MCS7 : -69
|802.11g||6Mbps : -92
54Mbps : -75
|802.11b||1Mbps : -95
11 Mbps : -90
|Note: Specifications are subject to change without notice.|
The USB light will not illuminate until the repeater is successfully connected to another network.
Make sure the WiFi on your device is connected to "CCrane-***".
You should only need to wait for 1-2 minutes or until the USB light comes on the CC Vector. You will need to go to your WiFi settings on your device to select "CCrane-***". This can also happen if you have WiFi Assist active. This is when your WiFi device automatically disconnects from networks and connects to other known networks (popular in Windows 10 & iOS7+).
In order to access the Repeater settings in the future, you will need to enter your new IP address into your browser instead of 192.168.8.1. Make sure to write the new IP address in your instructions.